PNS-200
PNS-200

Sunflower seed sifter PNS-200 is designed for sifting previously crushed sunflower seeds with simultaneous separation of the oil kernel and peelings in the production of vegetable (sunflower) oil. Technical productivity for the initial product not less than 160 tons per day.

Sunflower seed sifter PNS-200 is designed for sifting previously crushed sunflower seeds with simultaneous separation of the oil kernel and peelings in the production of vegetable (sunflower) oil. Technical productivity for the initial product not less than 160 tons per day.

Comparison of PNS-200 with NVH

1. The technological scheme of separation of dehulled product, vibration frequency is saved.

2. As if PNS-200 was designed to provide the huller NRH-8 with twice better productivity of the NRH-4-01, the sieve area's was doubled. Accordingly, the weight is twice as much.

3. The height of the floor for installation has increased to 5800...6000 mm.

4. Advantage over the technology of other manufacturers, where, for example, two SMA-203 OILs occupy two floors of 6000 mm = 12000 mm, and PNS-200 with the best technological indicators - 6000 mm - one floor.

5. Taking into account the experience of NVH, PNS-200 takes into account the following:

- a complete rejection of wood and plywood products, namely, wooden screen inserts (sieve frames) are replaced by light metal structures made of hollow rectangular profiles.

- the ability to take out and maintain sieve frames from both sides.

- a one-piece metal removable assembly box is made, in contrast to the built-in NVH with plywood parts, which simplifies maintenance and repair work.

 Technological productivity by initial product, min., tons per day      

  160

 Oil content (without wax) in outgoing hulls above commercial,   max., %

                 from the settling chambers 

 

 

1,0*

                 after control

0,8**

 Hulls content in the kernel,  max., %

12*

 Kernel loss with hulls,  max, %

1,1*

 Rated capacity, kW

7,0

 Circular vibration frequency of sifter, C –1

3,31***

 Circular vibration trajectory radius, mm

45…50

 Fan shaft speed,  C –1

11,8-13,0

 Air consumption,  max., m3/h

18000

 Required space in assembly,  max., m2

9,2

 Specific energy consumption,  max., kW/h/ton     

1,1

 Overall dimensions,  max., mm

 

 Length

4000

 Width

4250

 Height

4500

 Product weight,  kg (max.)

         6500  ****

 Established service life before overhaul, years

5

 Full specified service life, years

8

Notes:

*  If the machine is operated on dehulled product from hybrid sunflower seeds with high oil content, then the content of unhulled or partially hulled seeds will be max. 25%, oil containing dust will be max. 10% and damaged kernels - max. 15% (if operated on dehulled product from commercial sunflower seeds, absolute values of designed capacity shall be reduced by 1.5 times) .

** If the machine is operated at hulls control with oil content (without wax) max. 1%.

*** Depending on a sunflower size the frequency can be changed within the range from 3,17 to 3,58 С-1. A required sifter vibration frequency is set by means of electric motor changeable sheave wheel selection: Ø126mm, Ø142mm. Sheave wheels are supplied on special order. The sifter is equipped with Ø132mm sheave wheel.

****Without spare, installation and replacement parts.


Видео испытаний.